🎨 Paint Color Data

Home › Sherwin-Williams › Gray › Pewter Cast

Pewter Cast SW 7673

On-screen approximation from the published RGB value. Order a physical sample before you decide.

Hex#9B9893
RGB155, 152, 147
LRV31.4
UndertoneYellow (subtle)
Warm / coolWarm
UseInterior & exterior

Undertone: Subtle yellow undertone

In CIELAB, Pewter Cast sits at L* 63.0, a* 0.2, b* 3.0. Its hue angle is 87° and its chroma is 3.0, so it leans yellow only slightly — the undertone mostly shows next to whiter or grayer colors. It classifies as warm. Among Sherwin-Williams colors with a similar LRV (±5), it is warmer (more yellow) than 30%.

LRV 31.4: mid-tone

Light Reflectance Value runs from 0 (absolute black) to 100 (perfect white). At 31.4, Pewter Cast is lighter than 40% of Sherwin-Williams colors. Reads clearly as a color. Best in rooms with good natural light, or as an accent wall; small dark rooms may feel smaller.

Closest Benjamin Moore match to Pewter Cast

Ranked by CIEDE2000 color difference (ΔE) computed from published RGB values. Below 2 is hard to tell apart on the wall; above 4 is a different color.

ColorCodeΔE2000How close
EscarpmentCC-5182.07Close — difference visible side by side
Willow Creek14682.07Close — difference visible side by side
Graystone14752.20Close — difference visible side by side

Closest Behr match to Pewter Cast

Ranked by CIEDE2000 color difference (ΔE) computed from published RGB values. Below 2 is hard to tell apart on the wall; above 4 is a different color. Behr does not publish LRV, so Behr values here are estimates.

ColorCodeΔE2000How close
Casual GrayBNC-171.58Very close
Dolphin GrayHDC-NT-10A1.71Very close
Elephant SkinPPU18-162.25Close — difference visible side by side

Similar Sherwin-Williams colors

ColorCodeΔE2000How close
AcierSW 91701.63Very close
BedrockSW 95631.82Very close
Summit GraySW 76691.90Very close
Polished ConcreteSW 91672.38Close — difference visible side by side
Gray ShingleSW 76702.75Close — difference visible side by side
PavestoneSW 76422.76Close — difference visible side by side

Lighter and darker versions

Colors from Sherwin-Williams with nearly the same hue and saturation, one step lighter or darker.

Colors that go with Pewter Cast

Sherwin-Williams's own coordinating colors for Pewter Cast:

Pewter Cast is too close to neutral (chroma 3.0) for hue-based pairings to be meaningful; pair it with any color that shares its yellow lean, and use a crisper white for trim.

Pewter Cast vs popular colors

Independent project, not affiliated with or endorsed by Sherwin-Williams, Benjamin Moore or Behr. Color names and numbers belong to their owners. Screens show colors differently and paint changes with light and sheen — always look at a physical sample on your wall before buying.